I-RV reducer welding positioner echanekileyo kakhulu

Inkcazo emfutshane:

I-positioner iyakwazi ukujikeleza i-workpiece iye kwindawo efanelekileyo yokuwelda. Ukuze kufezekiswe isiphumo esihle sokuwelda. Iphucula kakhulu ukusebenza kakuhle.

1.Imodeli:JHY4030U-120

2. Umthwalo womthwalo: 300kg

3. Ubungakanani be-Turntable: 1200 * 650mm

Ulawulo ngekhabhinethi yokulawula okanye ikhabhinethi ye-PLC

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkcazo

● I-welding positioner yenziwe yi-worktable rotation unit, i-overturn unit kunye nenkqubo yokulawula yombane.
● Intshukumo ye-positioner ingalawulwa ngokukhawuleza ngeqhosha lokuqala nelokumisa.
● Umsebenzi wokwandisa ulawulo lokudibanisa nezinye izixhobo.
● kunye neenzuzo zomthamo omncinci, inkangeleko entle, ubunzima obuphantsi kunye nokusebenza okulula.
● Uyilo olukhethekileyo ngokwendlela yokusebenza yabathengi kunye nenkqubo yokuwelda iyafumaneka ngokwesicelo ngasinye
I-turntable ye-positioner ingenziwa ibe yingqukuva okanye imilo engentla.
Ubungakanani be-turntable yokuwelda kunye nomthwalo we-axis zingenziwa ngokwezifiso.
● Ingahlengahlengiswa kwezinye iimpawu zeerobhothi ezifana neFanuc, ABB, KUKA, Yaskawa. (umzobo wenjini kufuneka unikezelwe ngabathengi, emva koko sishiya umngxuma wokufakelwa ngokusekelwe kumzobo wenjini)
Iikhabhinethi ze-PLC azinyanzelekanga.

Ububanzi bePositioner

Imodeli	JHY4030U-120
Ixabiso leVoltage yokufaka elilinganiselweyo	Isigaba esinye se-220V, 50/60HZ
Iklasi yokukhusela iimoto	F
Itheyibhile Yomsebenzi	1200 * 650mm/ububanzi 1200mm (ingenziwa ngokwezifiso)
Ubunzima	Malunga ne-400kg
Umthwalo ophezulu	Umthwalo we-Axial Payload ≤300kg / ≤500kg/ ≤1000kg (＞1000kg ingenziwa ngokwezifiso)
Ukuphindaphinda	± 0.1mm
Indawo yokuma	Nasiphi na isikhundla

Iimveliso eziphambili ze-welding positioner yethu
I-axis enye yentloko-umsila ojikelezayo uhlobo lwe-welding positioner
I-axis enye yentloko-stock ejikelezayo ethe nkqo yokumisa iwelding
I-positioner yokuwelda ejikelezayo ethe tye ye-axis enye
I-positioner yokuwelda yohlobo lwe-P oluzi-2 axis
I-positioner yokuwelda yohlobo lwe-U ene-axis ezimbini

I-positioner yokuwelda yohlobo lwe-L oluzi-2 axis
I-positioner yokuwelda ethe tye ye-axis ezi-3
I-positioner yokuwelda ye-flip ejikelezayo ezi-3 ezijikelezileyo phezulu-ezantsi

Iphakheji: Iikheyisi zomthi
Ixesha lokuhanjiswa: Iintsuku ezingama-40 emva kokuba kufunyenwe intlawulo kwangaphambili

FAQ

Q: Ingaba siyinkampani yokurhweba okanye singumenzi?
A: Singabenzi bemveliso abanamava angaphezu kweminyaka eli-10.

Q: Ngaba unayo eyakho i-welding robotics?
A: Ewe. Sikwangumvelisi weerobhothi zokuwelda.

Q: Iphi imboni yakho? Ndingatyelela njani apho?
A: Umzi-mveliso wethu ukwidolophu yaseWuxi eTshayina.

Q: Ungaqinisekisa njani umgangatho wemveliso?
A: Sinenkqubo yokulawula umgangatho engqongqo kwinkqubo yemveliso kwaye siyabamkela abathengi abasityelelayo ukuze bajonge umgangatho wemveliso ngaphambi kokuba ihanjiswe.

Q: Lingakanani ixesha lewaranti?
A: Unyaka omnye.

Ngaphambili: I-servo positioner ye-payload enzima ye-axis ezimbini

Okulandelayo: Isikhundla sokuwelda esijikelezayo esisebenza kakuhle esine-axis ezi-3

Bhala umyalezo wakho apha uze uwuthumele kuthi